Equipment description
It adopts an advanced control system and operation interface. Users only need to operate the machine simply to complete the winding of flat wires. This machine features a high degree of intelligence and automation, automatically achieving material discharge, leveling, conveying, paint stripping, winding, shearing and material collection, reducing the labor intensity of the operator and the occurrence of mechanical failures. It is widely applied in the fields of new energy, vehicle-mounted, photovoltaic energy storage, rail transit, electronics, machinery, automobiles, medical care and household appliances.
Equipment advantages
1. The product has high precision requirements
2. The coil has relatively good stability, consistency and flatness
3. It is applicable to winding and forming of various shapes
4. Reduce the subsequent paint removal process, ensuring safety and environmental protection
5. Strong efficiency and versatility
6. It features a high degree of automation and no manual intervention is required for full material collection
1 | Device model | NOMURA-D40 (Double-sided Paint Peeling) |
2 | Control mode | PLC: Mitsubishi |
3 | Operation panel | Touch screen can be operated as a stand-alone machine |
4 | Program editing | PLC touch screen communication |
5 | Control the number of axes | 3-axis unwinding-wire feeding-winding |
6 | Travel of each axis | Spool feed: 150mmMAX Spool: 185°MAX |
7 | Corresponding wire diameter | The cross-sectional area is within 40 square millimeters Main winding: width 3mm~14mm thickness 0.4mm~5mm width ratio: 20MAX |
8 | Coil Size: (Square, Rectangle, Runway) | The minimum long side of the main winding coil: 20mm, the maximum long side is 150mm; The minimum short side is 6mm, and the longest short side is 150mm (according to the size of the wire gauge, subject to the manufacturer's reply) Coil OD: 150mm MAX Coil number requirement: The weight of the coil itself does not affect the winding angle |
9 | power supply | Single-phase 220V, 4KW |
10 | Device form factor | Host: 1.6m (length) * 0.75m width * 1.8m (height) Automatic discharge rack: 1m*0.8m*0.5m |
Milling cutter peeling parameter configuration |
|
project | Models |
| BX2A |
name | Double-sided milling cutter paint stripping machine |
Minimum wire gauge | 6mm×0.8mm (copper wire) 8mm×1.0mm (Aluminum Wire) |
efficiency | 2.5mm/s+8s (milling cutter opening and closing) |
Number of axes | 2 |
Shaft running accuracy | 0.03-0.05mm |
Shaft travel | ≤ 20mm/shaft |
shaft motor | 57 steps (optional servo) |
Spindle motor | 2×300W (DC air cooling) |
rotate speed | MAX: 12000r/min (speed regulation) |
Operating voltage | 48VDC |
milling cutter | 2×3.175mm (wearing parts) |
noises | ≈60dB |
auxiliary | Blowing + vacuuming |
Gas consumption | 0.424 L/s (adjusts the duration according to the paint stripping time) |
Installation | Bottom plate fixation (hole position can be customized) |
Tel ：+86 177-1553-1534
