Equipment description
It adopts an advanced control system and operation interface. Users only need to operate the machine simply to complete the winding of flat wires. This machine features a high degree of intelligence and automation, automatically achieving material discharge, leveling, conveying, winding, shearing and material collection, reducing the labor intensity of the operator and the occurrence of mechanical failures. It is widely applied in the fields of new energy, vehicle-mounted, photovoltaic energy storage, rail transit, electronics, machinery, automobiles, medical care and household appliances.
Equipment advantages
1. The equipment occupies a small area
2. Short product switching and machine adjustment time: For the same wire diameter but different sizes, the debugging can be completed within 5 to 10 minutes. The debugging can be completed within 10 to 30 minutes when switching between different wire diameters. The time for adjusting the machine and changing the mold is short, and only six screws need to be fixed
3. The coil has relatively good stability, consistency and flatness
4. It is applicable to winding and forming of various shapes
5. The molds have strong versatility
6. High winding efficiency
7. Low maintenance cost in the later stage
1 | Device model | NOMURA-D40 |
2 | Control mode | PLC: Mitsubishi |
3 | Operation panel | Touch screen can be operated as a stand-alone machine |
4 | Program editing | PLC touch screen communication |
5 | Control the number of axes | 3-axis unwinding-wire feeding-winding |
6 | Travel of each axis | Spool feed: 150mmMAX Spool: 185°MAX |
7 | Corresponding wire diameter | The cross-sectional area is within 40 square millimeters Main winding: width 3mm~14mm thickness 0.4mm~5mm width ratio: 20MAX |
8 | Coil Size: (Square, Rectangular, Runway) | The minimum long side of the main winding coil: 20mm, the maximum long side is 150mm; The minimum short side is 6mm, and the longest short side is 150mm (according to the size of the wire gauge, subject to the manufacturer's reply) Coil OD: 150mm MAX Coil number requirement: The weight of the coil itself does not affect the winding angle |
| 9 | power supply | Single-phase 220V, 2.5KW |
10 | Device form factor | Host: 1.6m (length) * 0.75m width * 1.8m (height) Automatic discharge rack: 1m * 0.8m * 0.5m |
Tel ：+86 177-1553-1534
